Party Vibe

We have built a few bits and pieces in the past. We have sold it all now and moved on to other bits of kit.

Building a rig probably has a lot more self satisfaction involved though!

Good luck with it all. Would be good to see some pictures of it through the production stage if you are up for sticking them up.

I take it you will be buying the amps though?

What are the double 18’s loaded with?

We have 2 QSC RMX4050HD’s for sale that might run them very nicely.

If the drivers are 8ohm and 600w or under then they’ll be perfic.

Quality amp and they are only 1 year old, bought from new and in MINT condition.

£680 each 🙂

You going to be running 4way then?

It’s more of a question of what driver would be suitable for the cabinet. Do you know the cabinet design?

I’m guessing you’ll be running 1 double 18″ cab of each channel of the amp yes? If that’s the case then make sure you get the 4ohm version of the omega pro. This will mean each channel will be delivering 1600w through 2ohms.

Ideally it’s nice to have a little bit more power in your amp in comparison to your drivers so that the amp has more to draw on during transients and you can also push the speaker hard without fear of clipping.

But yeah, they will give you the power you need.

An ideal power to match the amps would be a 600w 8ohm driver in my opinion. But again, you should try to match the driver spec to the intended driver the cabinet was designed for.

If you are still intersted then send me a private message mate 🙂