The blotter art shouldn’t contain LSD if it’s sold as “art”. I’d do one drip per blotter for the reasons log mentioned. Also make sure you let it dry on something like a wire rack for cooling cakes before you touch it as you could get a load on your skin and start tripping a few hours later (remember there’s probably LSD on the wire rack now so make sure it’s washed thoroughly, mby even give it a blast in the oven to make sure the next time you bake cakes you don’t suddenly start tripping :laugh_at:) . It might be a good idea to wear latex gloves or something similar to be extra sure when dripping the LSD on, still leave it to dry before splitting it and putting it in a baggy, a fan on a low setting a meter or two away can help speed this up (Just make sure it isn’t going to blow your tabs away xD).
Also put the LSD on the side without the picture as it’s more absorbent (found this out when p0ly ended up with a ton of really strong LSD all over his hands trying to do the same thing :laugh_at:).
You don’t have to soak it as one drip is normally about one dose. If it’s not strong enough after you’ve given it one drop on each, you can always repeat the process and do another drop on them after it’s dried from the first time.
You can just drip it onto your hand and lick it off if you really want. I’d say you could drip it into your mouth, but there’s chance you might accidentally squirt out more then one drop, and there’s not much going back if it’s already in your mouth, but if it’s on the back of your hand you can just suck it back into the dropper and re do it (don’t forget there will already be some on your hand still though).
With regards to storage, keep in a cool place in a container that can’t let any moisture in (air tight is best) and doesn’t let sunlight in (or keep in a dark place). Heating it too much and a lot of exposure to light can totally kill the LSD. This is why liquid comes in them dark brown dropper bottles designed to stop light getting in but still being able to see what’s inside.
